HP HP0-P20 Dumps, Free HP HP0-P20 Exam Preparation Guide Is Your Best Choice

Welcome to download the newest Pass4itsure HP0-P20 dumps:

Important Info: These new valid HP HP0-P20 exam questions were updated in recent days by HP HP0-P20,please visit our website to get the full version of new HP HP0-P20 exam dumps with free version of new VCE Player, you can pass the exam easily by training it!

30 DRAG DROP
Click the Task button. Place the commands next to the functions they perform.

Answer: Question No : 31

Which statement is true about the difference between a process and a thread?
A. A process and a thread are the same, there is no major difference.
B. A thread is another name for the child of a system-related process.
C. A thread must have two processes to be able to run on multiple CPU cores.
D. A multi-threaded process can run on multiple CPU cores.
Answer: D
Explanation:
Question No : 32
While troubleshooting a network printing problem, you notice that the printer service is not listening for requests. Which file should you check to make sure the printer service is not missing or commented out?
A. /etc/default/printer.conf
B. /etc/inetd.conf
C. /etc/hosts
D. /etc/networks
Answer: B
Explanation:
Question No : 33 DRAG DROP
Click the Task button. Place each network configuration file next to its description.

Answer: Question No : 34

As the system administrator you need to add a default route to the routing table. Which command should you use?
A. route add network 192.168.0.0 1
B. route add net 192.168.0.1 192.168.1.1 1
C. route add host 192.168.0.1 192.168.1.1 1
D. route add default 192.168.0.1 1
Answer: D
Explanation:
Question No : 35
NTP should be configured and activated on all servers running HP-UX 11i v3 to enable which function?
A. network transport protocol
B. network tuning to maximize performance
C. synchronized time between servers
D. network transactions processing
Answer: C
Explanation:
Question No : 36
Which HP-UX command can be used to verify a network interface card (NIC) is enabled?
A. ping
B. nwmgr
C. arp
D. nslookup
Answer: B
Explanation:
Question No : 37
Which tool is used to verify CIFS operation?
A. cifsadmin
B. smbclient
C. testparm
D. cifsdadm
Answer: B
Explanation:
Question No : 38
What do you use to list clients that have mounted exported file systems? (Select two.)
A. showmount -a
B. more /etc/mounts
C. mount -v
D. more /etc/rmtab
E. more /etc/nfstab
Answer: A,D
Explanation:
Question No : 39
Which file contains configuration parameters that can be used to enable or disable AutoFS on an HP-UX 11i v3 system?
A. /etc/nfsconf
B. /etc/automount.conf
C. /etc/netconf
D. /etc/rc.config.d/nfsconf
Answer: D
Explanation:
Question No : 40
How is IP multiplexing implemented on an HP-UX host?
A. by binding the same IP address to multiple network interfaces
B. by binding more than one IP address to a single network interface
C. by binding more than one MAC address to a single network interface
D. by increasing throughput on the network interface
Answer: B
Explanation: Question No : 41
When troubleshooting a disk problem, which HP-UX 11i v3 command correlates a LUN’s device special file (DSF) with its hardware path?
A. scsiutil
B. iofind
C. scsimgr
D. ioinit
Answer: C
Explanation:
Question No : 42
What does the command ch_rc do?
A. changes the chroot to the current directory
B. lists, adds or modifies parameters of /etc/rc.config.d
C. alters the permissions of root directory
D. sets the default values to the content of /etc/rc.config.d
Answer: B
Explanation:
Question No : 43
If your organization’s security policy prohibits web service on production servers, you can disable the HP System Management Homepage (SMH) web interface entirely with which commands or actions? (Select two.)
A. smhstartconfig -a off -b off
B. /sbin/init.d/hpsmh stop and vi /etc/rc.config.d/hpsmh
C. /sbin/init.d/smhconfig stop
D. smhconfig -a off -b off
Answer: A,B Explanation:
Question No : 44
Which command is used to list device file details?
A. lsdev
B. insf -e
C. lssf <special file>
D. lsf -a
Answer: C
Explanation:
Question No : 45
Which statement is true about dynamically disabling swap devices in an HP-UX 11i v3 system?
A. You use swapoff /dev/vg01/swapvol.
B. You are able to do this in VxFS v4 or later.
C. You cannot disable them dynamically.
D. You use swapon -d /dev/vg01/swapvol.
Answer: A
Explanation:
Question No : 46
Which directory keeps a backup of the kernel configuration that was created during the last OS install?
A. /stand/nextboot/
B. /stand/last_install/
C. /stand/newconfig/
D. /stand/backup/
Answer: B
Explanation:
Question No : 47
Which steps are necessary to use /etc/shadow on a server running HP-UX 11i v3?
A. Install the ShadowPassword product; run /usr/sbin/pwck; run /usr/sbin/pwconv.
B. Run /usr/sbin/pwck; run /usr/sbin/pwconv; restart pwgrd.
C. Run /usr/sbin/pwck; run /usr/sbin/pwconv.
D. Run /usr/sbin/pwck; run /usr/sbin/pwconv; convert to trusted system using SAM.
Answer: C
Explanation:
Question No : 48 DRAG DROP
Click the Task button. Match each backup/archive tool with its operation.

Answer: Question No : 49

The following message is displayed while attempting to unmount the /data file system: # umount /data umount: cannot unmount /data : Device busy Which command is used to determine which user is causing the file system to be busy?
A. bdf /data
B. fuser -cu /data
C. showmount /data
D. who /data
Answer: B
Explanation:
Question No : 50
What is the path of the EFI operating system loader for HP-UX boot disks?
A. \EFI\HPUX\HPUX.EFI
B. \EFI\HPUX.EFI
C. \EFI\OS\HPUX.EFI
D. \EFI\HPUX\AUTO
Answer: A
Explanation: Question No : 51
Which command is used to determine which versions of LVM are supported on your system?
A. lvmadm -t
B. lvcreate -L
C. lvmadm -v
D. lvcreate -l
Answer: A
Explanation:
Question No : 52
What happens when HP SIM is used to launch a tool?
A. Authorizations are configured in HP SIM.
Users are authenticated using PAM on the HP SIM server.

B. Authorizations are configured in HP SIM.
Users are authenticated using the internal user database of HP SIM.

C. Authorizations are configured in Select Access.
Users are authenticated using the internal user database of HP SIM.

D. Authorizations are derived from operating system login account permissions.
Users are authenticated using PAM on the HP SIM server.

Answer: A
Explanation:
Question No : 53
What can an administrator do to optimize the performance of an existing JFS file system?
A. change mount options
B. change syslog.log size
C. increase SWAP size
D. increase the number of logical volumes
Answer: A
Explanation:
Question No : 54
What are parts of the Agile View FC LUN hardware path address? (Select three.)
A. root node
B. WWID
C. bus address
D. port name

E. LUN ID
F. LUN address
Answer: A,C,E
Explanation:
Question No : 55
If the HP-UX System Management Homepage (SMH) daemon is not running, which command will start it?
A. smh startup
B. hpsmh autostart
C. hpsmh start
D. smh start
Answer: B
Explanation: Question No : 56
Which commands can be used to interrupt a running process?
A. <ctrl-z>, <ctrl-c>, bg, and kill
B. <ctrl-z>, <ctrl-c>, fg, and kill
C. <ctrl-z>, <ctrl-c>, <ctrl-\>, fg, bg, nohup and kill
D. <ctrl-z>, <ctrl-c>, <ctrl-\>, and kill
Answer: D
Explanation:

Welcome to download the newest pass4itsure HP0-P20 dumps: https://www.pass4itsure.com/hp0-p20.html

The HP HP0-P20 training is a vital way of becoming the best.This HP HP0-P20 certification has helped the candidates to enhance their capabilities by providing a great learning platform to them so that they can polish their skills.