New Latest HP0-Y51 Practice Test Helps Pass HP0-Y51 Successfully

100% Pass Guarantee You can download free HP0-Y51 exam dumps with all new added questions and answers from softwarexam.com.With our HP0-Y51 exam questions and answers in hand, a lot candidates pass the exam at their first time. We make our promise that Softwarexam is your best choice.

QUESTION 1
Refer to the exhibit.

A company has HP APs that are managed by the two Unified Wired-Wireless controllers. Wireless users use Wi-Fi Protected access (WPA2) and authenticate with 802.1X to HP Access Manager (UAM). The SSID uses centralized forwarding. Users need to be able to roam seamlessly from area 1 to area 2.
Which step helps to meet these needs?
A. Configure local forwarding for the SSID on both controllers.
B. Configure controller 1 as a backup controller for APs in area; configure controller 2 as a backup controller for APs in area1.
C. Change the security mode to preshared key (PSK) and enable opportunistic key change (also called “fast roaming”).
D. Set up enable a roam that includes both controllers. Correct Answer: A
Explanation Explanation/Reference:
QUESTION 2
An administrator sets up an OpenFlow instance on an HP Provision switch in passive mode. What does this mean?
A. The switch first attempts to switch or route traffic using its own MAC forwarding and routing tables. If it does not know how to treat the traffic, it uses the OpenFlow table.
B. The switch does not associate this OpenFlow instance with a specific VLAN Instead VLANs that are not assigned to another OpenFlow instance are associated with this instance.
C. The switch matches all traffic in the instance against an OpenFlow table, but, if it finds no match, it forwards the traffic normally
D. The switch does not forward any traffic in the instance locally. Instead, it encapsulates all traffic in OpenFlow Packeket_Out messages to the controller. Correct Answer: B
Explanation Explanation/Reference:
QUESTION 3
Table of Acronyms

An HP Comware switch is configured with the MDC feature. It has three MDCs, which use the same CPU and are assigned these CPU weights:
MDC 1 = 10

MDC 2 = 4

DC 3 = 2
Currently:

MDC 1 needs to use 25 percent of the CPU resources.
MDC 2 needs to use 60 percent of the CPU resources.

MDC 3 needs to use 60 percent of the CPU resources.
Approximately what percentage of the CPU does each MDC receive while at the current CPU request rates?
A. MDC 1 = 25 percent, MDC 2 = 50 percent, and MDC 3 = 25 percent
B. MDC 1 = 63 percent, MDC 2 = 25 percent, and MDC 3 = 12 percent
C. MDC 1 = 10 percent. MDC 2 = 4 percent, and MDC 3 = 2 percent
D. MDC 1 = 25 percent. MDC 2 = 25 percent, and MDC 3 = 12 percent
Correct Answer: B Explanation
Explanation/Reference:
Reference: http://h10032.www1.hp.com/ctg/Manual/c03595099 (page 209, see `specifying a CPU weight for an MDC’)
QUESTION 4
A company is deploying an HP Unified Wired-Wireless controller solution with an HP BYOD solution. Guests will connect to an open Guest SSID and be redirected by their default gateway to a portal hosted by User Access Manager (UAM). The default gateway is a Comware routing device.
The administrator has set up portal authentication on the Comware device to implement the redirect. The administrator asks the BYOD solution designer about the correct RADIUS and domain settings for portal authentication on the switch. What should the BYOD solution designer explain to the administrator?
A. The administrator does not need to make any changes as long as the switch is managed by IMC. UAM will automatically access the managed switch and configure the correct settings.
B. These settings are not necessary because the UAM BYOD portal automatically handles the authentication and then forces the guest to reconnect the SSID and authenticate with MAC-Auth.
C. The RADIUS scheme and domain must be configured with the same settings that would be used for traditional portal authentication to UAM. In addition, the RADIUS scheme must use the standard server type.
D. The RADIUS scheme and domain must be configured with the same settings that would be used for traditional portal authentication to UAM. In addition, the RADIUS scheme must enable transparent MAC authentication.
Correct Answer: D Explanation
Explanation/Reference:
QUESTION 5
Refer to the exhibit.

An HP provision switch has OpenFlow table entries indicated in the exhibit.

The switch should forward most traffic between 10.1.10.0/24 and 10.1.20.0/24 on port 1. However any IP traffic between server 1, at 005056-111111 and
10.1.10.10, and server 2, at 005056-222222 and 10.20.20, should be forwarded on port 2.
Which change to the rules let the switch behave as desired?

A. For flow 3, the table ID is set to 200, and the priority is set to 47000
B. For flow 4, the priority is set to 47000
C. For flow 4, the table ID is set to 100, and the priority is set to 47000
D. For flow 3, the instruction is set to Write Actions output 1 Correct Answer: A
Explanation Explanation/Reference:
QUESTION 6
Table of Acronyms Exhibit 1

Exhibit 2 The switches shown in the exhibit are implementing SPBM. The administrator is now setting up interface ten1/0/1 to connect to a new VMware host. What is the correct port type and VLAN assignment for the interface?

A. Trunk port than permits VLANs 101 and 103
B. Hybrid port than permits VLANs 201 and 203
C. Trunk port that permits VLANs 10 and 20
D. Access port that permits the default VLAN
Correct Answer: A Explanation Explanation/Reference:
QUESTION 7
Table of Acronyms

Refer to the exhibit

An administrator wants to connect four data centers using HP EVI. What is the correct setup for the EVI tunnel interfaces?
A. Three EVI tunnel interfaces on each EVI edge device-one EVI tunnel interface is required for each GRE tunnel in the mesh
B. One EVI tunnel interface on Switch 1, which will be configured as the ENDP server, and no interfaces on the other switches
C. Three EVI tunnel interfaces on Switch 1, which will act as the hub. and one EVI tunnel interface each on the other switches
D. One EVI tunnel interface on each EVI edge device–the devices automatically establish GRE tunnels between these interfaces Correct Answer: C
Explanation Explanation/Reference:
QUESTION 8
Table of Acronyms

Refer to the exhibit.

The switch shown in the exhibit should from a TRILL region. For Switch 1 interface ten1/0/22, what is a valid port link-type and TRILL port type?
A. port link type = access port in any VLAN TRILL port type = TRILL access port
B. port link type = access port in any VLAN TRILL port type = TRILL trunk port
C. port link type = trunk port that permits VLMs 10 and 20 TRILL- port type = TRILL access port
D. port link type = hybrid port with untagged VLANs 10 and 20 TRILL port type = TRILL hybrid port
Correct Answer: C Explanation
Explanation/Reference:

The HP0-Y51 training is a vital way of becoming the best. This certification has helped the candidates to enhance their capabilities by providing a great learning platform to them so that they can polish their skills.