HP HP0-J66 Certification, First-hand HP HP0-J66 Study Guides Guaranteed Success

At Flydumps,we are positive that our HP HP0-J66 preparation material with questions and answers pdf provide most in-depth solutions for individuals that are preparing for the HP HP0-J66 exam.Our uodated HP HP0-J66 Dumps will allow you the opportunity to know exactly what to expect on the exam day and ensure that you can pass the exam beyond any doubt.

A customer is preparing to migrate data between their data centers. They need to perform deduplicalion at the data creation point and eliminate the need for specialized deduplication hardware in their data centers. How does HP StoreOnce Catalyst enable the customer to achieve this goal?
A. by performing source-side deduplication
B. by performing switch-side deduplication
C. by performing server-side deduplication
D. by performing target-side deduplication
Answer: A Explanation: By enabling source-side deduplication (Dedupe 2.0), HP has the advantage of performing deduplication at the data creation point. Source-side deduplication eliminates the need for specialist deduplication hardware at remote and branch office sites. StoreOnce Catalyst allows customers to align backup with data protection needs, such as minimizing bandwidth utilization when moving data between sites or data centers.
Reference: Dedupe 2.0: What HP Has In Store(Once)

A customer is planning to migrate a database to a new site. They need to create an extended SAN in a single fabric namespace by using a dedicated link over a distance of 200 km.
Which network protocol should they use to achieve this goal?
B. iFC
Answer: A Explanation: FCIP connects Fibre Channel fabrics over IP-based networks to form a unified SAN in a single fabric. FCIP relies on IP-based network services to provide connectivity between fabrics over LANs, MANs, or WANs.
Note: HP SAN extension technologies include:

(greater than 10 km to 20,000 km)
(greater than 35 km to 100–500 km)
Fibre Channel using long-wave transceivers
(10 km–35 km)
A customer is extending a SAN by using wavelength division multiplexing (WDM) to migrate their master database to a new data center. They need to ensure that there is adequate line speed to perform the migration in the event of a primary path failure.
What should the customer do to achieve this goal?
A. Ensure that all SAN devices use the same Fibre Channel speed.
B. Ensure that all SAN switches have the same core PID number.
C. Ensure that there are separate WDM paths for transmitting and receiving packets
D. Ensure that a secondary path with sufficient buffer-to-buffer credits is available
Answer: D Explanation: WDM devices extend the distance between two FICON directors. The devices are transparent to the directors and do not count as an additional hop. To accommodate WDM devices, you must have enough Fibre Channel BB_credits to maintain line-speed performance. WDM supports Fibre Channel speeds of 10 Gb/s, 8 Gb/s, 4 Gb/s, 2 Gb/s, and 1 Gb/s. When planning for SAN extension, BB_credits are an important consideration in WDM network configurations. Typical WDM implementations for storage replication include a primary and secondary path. You must have enough BB_credits to cover the distances for both the primary path and secondary path so that performance is not affected if the primary path fails.
Reference: HP Mainframe Connectivity Design Guide

A customer plans to migrate data from a third-party storage system to an HP 3PAR solution. The customer has leased data center space. Which HP 3PAR Storage solution must be integrated into an HP 3PAR rack?
A. HP 3PAR StoreServ 10800
B. HP 3PAR StoreServ 10400
C. HP 3PAR StoreServ F200
D. HP 3PAR StoreServ 7400

Answer: A Explanation:
A company needs to migrate from a third-party storage system to an environment that can grow by scaling out. The solution must also allow use of a server for downloading upgrades.
Which solution meets the company’s requirements?
A. HP 3PAR StoreServ 7000
B. HP StoreOnce 6200
C. HP StoreVirtual 4000
D. HP 3PAR StoreServ 10000
Answer: C Explanation:

A storage administrator needs to perform a gradual migration of large backup volumes and jobs to a remote D2D system over time. Because this data is being replicated for the first time, the administrator needs to populate the target device with all the relevant hash codes.
Which method should the administrator use to achieve this goal?

A. using co-location
B. using removable media
C. seeding data over the WAN link
D. setting initializer to migration
Answer: C Explanation: * prior to being able to replicate only unique data between source and target D2D, we must first ensure that each site has the same hash codes or “bulk data” loaded on it – this can be thought of as the reference data against which future backups are compared to see if the hash codes exist already on either source or target. The process of getting the same bulk data or reference data loaded on the D2D source and D2D target is known as “seeding”.
* Seeding is generally is a one-time operation which must take place before steady-state, low bandwidth replication can commence. Seeding can take place in a number of ways: / Over the WAN link – although this can take some time for large volumes of data / Using co-location where two devices are physically in the same location and can use a GbE replication link for seeding. After seeding is complete, one unit is physically shipped to its permanent destination. / Using a form of removable media (physical tape or portable USB disks) to “ship data” between sites.

A small-business customer needs to implement a high IOPS storage system for an application that uses approximately 7 TB of space. Because the customer does not expect a large amount of data growth in the next few years, they need to minimize costs.
Which storage system should the customer implement?
A. HP 3PAR StoreServ 7400
B. HP 3PAR StoreServ 10000
C. HP 3PAR StoreServ F200
D. HP 3PAR StoreServ 7200
Answer: D Explanation:

A customer wants a new HP 3PAR StoreServ 7200 Storage System to maximize storage performance. What should the customer implement?
A. quad controllers
B. Adaptive Optimization
C. 120 SSDs
D. Dynamic Optimization
Answer: B
Explanation: The HP 3PAR Adaptive Optimization (AO) software takes optimization a step further
into sub-LUN tiering. AO migrates sub-LUN data across CPGs based on user-defined policies.
Two or three CPG tiers can be specified per policy; all volumes
inside a CPG are subject of an AO policy. AO policies usually operate on an FC and NL tier or on
an SSD, FC, and NL tier.

This tool can improve system response and reduce disk acquisition cost by
storing frequently accessed data in the faster tier while moving infrequently accessed data to the
slower and cheaper slower tier.


Not D: Related to online migration:
P 3PAR’s Dynamic Optimization (DO) software offers the functionality of EVA’s Dynamic LUN
Migration: volumes are migrated online to another CPG with a different RAID level, set size, drive
media type , etc.
Your customer has an existing HP StoreServ 7400 with four controllers. The array has only SSD drives installed. What should you consider when sizing a solution which includes Adaptive Optimization?
A. Ensure that 3% of the capacity and 30% of the performance can be delivered by the SAS disks.
B. Include SAS 10/15K disks in the configuration.
C. Add SSDs or nearline disks to a single node pair.
D. Size the nearline tier for 30% of the performance requirement.
Answer: B Explanation:
SAS stands for Serial Attached SCSI. Basically, a SAS drive utilizes the same form factor as a SATA drive but has several high performance advantages. First of all, there’s the platter speed. While typical SATA drives operate at 7200RPM, a SAS drive operates at 10K or 15K. Although the platter speed is double that of SATA, the MTBF (Mean Time Before Failure) remains at the industry standard of 1.2 million hours.

Make sure to define tier 0 to be on a higher performance level than tier 1, which in turn should be higher performance than tier 2. For example, you may choose RAID 1 with SSDs for tier 0, RAID 5 with FC drives for tier 1 and RAID 6 with NL or SATA drives for tier 2.

Best practices encourage you to begin your Adaptive Optimization configurations with your application CPG starting with tier 1. For example, tier 1 could be CPG using your FC or SAS physical disks. This allows you to add both higher and lower tier capabilities at a later date. If you don’t have higher or lower tier, you can add either or both at a later date by using a new CPG, such as tier 0 using SSDs or tier 2 using NL. Or, you could have CPG tiers with RAID 1 or RAID 5 and RAID 6. The main point is that you should begin with middle CPG tier 1 when configuring Adaptive Optimization with your application.

Example: HP 3PAR Adaptive Optimization moved ~33 percent of the IOPS workload to the SSD drives even though that involved moving only 1 percent of the space. Performance improved in two ways: the 33 percent of the IOPS that were serviced by SSD drives got very good latencies (~2 ms), and the latencies for the NL drives also improved (from ~40 ms to ~15 ms). Moreover, the investment in the 16 SSD drives permitted them to add even more NL drives in the future, because the SSD drives have both space and performance headroom remaining.
Reference; Adaptive Optimization for HP 3PAR StoreServ Storage

A company needs a storage solution that provides four host bus adapter (HBA) slots and 64 GB of cache. Which HP storage solution meets these requirements?
A. HP 3PAR StoreServ 7400
B. HP StoreOnce 6200
C. HP 3PAR StoreServ 7200

D. HP StoreVirtual 4000
Answer: A Explanation: HP 3PAR StoreServ 7400 4-node base with two 2U enclosures, four controller nodes, 64 GB cache, eight 8Gb/sec FC ports, four adapter slots, and 48 SFF drive bays.

Not C: 3PAR StoreServ 7200 only has 32 GB cache.

A storage administrator needs highly available connectivity from a Microsoft Windows host to an iSCSI storage array. The administrator needs to ensure that the data is still available in the event of a network port failure. What must the administrator enable on the Windows host?
B. NIC teaming
C. storage cluster services
D. ISCSI initiator failover
Answer: A Explanation:

In which HP rack is the factory Integration of an HP StoreServ 7000 supported?
A. HP 5642 rack
B. HP G3 rack
C. HP 10000 rack
D. HPV142 rack

Answer: B Explanation: QUESTION NO: 13
You are meeting with a customer that has a small business with an unpredictable workload in a virtualized environment. Which product family from the HP array portfolio do you lead your discussion with?
A. P2000
B. P4000
C. X3000
D. P6000
Answer: B Explanation:

A customer needs to replicate data from a remote location to an HP StoreOnce B6200 Backup.
What should the customer consider when planning the replication?
A. The HP D2D sizing tool should be used to size link speed and understand concurrency restraints.
B. Concurrency control should be used if the replication is not run at the same times as backups and housekeeping jobs.
C. Separate replication jobs should be created for each data type.
D. Backups and housekeeping jobs should be run in the replication window.
Answer: A Explanation: The replication best practices that apply to HP StoreOnce D2D Backup Systems are equally as valid for the HP B6200 StoreOnce Backup System.
Best practices include:
* Use the Sizing tool to size replication link speed and understand replication concurrency restraints.
Reference; HP B6200 Backup System, Recommended Configuration Guidelines

Flydumps.com provides you with the most reliable practice exams to master HP HP0-J66 Certification. Our Microsoft questions and answers are certified by the senior lecturer and experienced technical experts in the Microsoft field. These test questions provide you with the experience of taking the actual HP HP0-J66 test.

HP HP0-J66 Certification, First-hand HP HP0-J66 Study Guides Guaranteed Success